2-in-1 Tower Fan & Heater MC706

When the heater is plugged into the electric outlet, the power indicator will light in red.
Once turned off, a 30-second countdown will show up on the display as the fan will continue to run for 30 seconds to blow out the remaining heat.

1. Ensure that the voltage and frequency are the same as required in the user manual.
2. Change the wall charger to see if it works.
3. Check whether the power plug indicator lights on when plugged in.

1. Turn off and unplug the unit. Allow it to cool and plug into the electrical outlet again.
2. Place it on a flat, level, and stable surface.
3. In ECO mode, the heater will turn off automatically when the set temperature has been reached. This is normal. If your heater turns off frequently, please raise the set temperature, or switch to Power Heat mode.
4. When the 24-Hour Auto Off feature is ON, the heater will shut off automatically after continuously running for 24 hours. Please turn this feature off.

1. Set the unit to "Heat" mode. Please note that in "Fan Only" mode, it will only blow cool air, similar to a tower fan.
2. Adjust the heating level to high.

1. Make sure the heating level is set to a high or desired temperature.
2. Also, ensure that the room is well-insulated and free of drafts, as these can impact the heater’s efficiency.
3. If the heater still does not warm the room effectively after these steps, please provide additional details, including the room size, how long the heater has been running, the current room temperature, and the target temperature setting. This information will help us further diagnose the issue.

1. Ensure proper room sealing to prevent cold air from entering the rooms.
2. Measure the ambient temperature beside the unit and compare it with the displayed temperature. If the difference is within 5 degrees Fahrenheit, consider potential measurement discrepancies between thermometers. Adjust the set temperature accordingly.

The higher the gear setting of the space heater, the louder the noise will be. We recommend turning down the unit speed to see if the noise will be reduced. Please record a brief video of the issue and send it to support for confirmation.

This appliance features auto-brightness.
The display adapts automatically based on the ambient lighting conditions. Touch to activate the control panel and LED display.

1. Make sure the Oscillation Function has been activated.
2. Change the air blowing angle from 120°/90°/60°/30° Oscillation via remote or control panel. The LED display indicates the fan angle accordingly.

1. Unlock the child lock setting.
2. Check both the remote control buttons and the buttons on the air conditioner unit simultaneously to see if there is any response.

1. Install fresh batteries following the polarity guide inside the battery compartment.
2. Ensure there are no obstructions between the remote and the unit. Point the remote directly at the LED display screen of the device.
3. Operate the remote control within a maximum distance of 26 feet from the unit, preferably at an angle of less than 45 degrees for optimal performance.

1. Ensure the appliance is for use on a nominal 120V circuit and should be connected to a grounding outlet.
2. Avoid using extension cords and do not share the same outlet with other household appliances.
3. In order to avoid overheating, do not cover the heater.
4. For brand-new machines, there will be a slight odor. It is recommended that customers use it with ventilation for the first few uses to dissipate the odor.